1. Antistatic gloves
A fabric consisting of a conductive fiber. The other is made of long fiber elastic acrylic knitted gloves, then the polyurethane part is attached to the glove part, or there is polyethylene coating on the fingertip part of the polyamide resin or gloves. The gloves that contain conductive fibers make the static electricity disappearing quickly on the hand. Gloves with polyurethane or polyethylene coating are not easy to produce dust and static electricity. These products are mainly used for the assembly of the weak current, the precision instrument, the product inspection, the electronics industry, the printing, the inspection of various research institutions, and so on.
Two, insulated gloves for live work
It refers to an insulating glove worn by the operator on live electrical works when AC voltage is below 10 thousand volts or below. Its product model, external size and technical requirements should be in accordance with the provisions of the general technical conditions for insulated gloves for live work. Gloves must have good electrical insulation. At the same time also need good tensile strength and elongation, puncture resistance, aging resistance, fire resistance performance and low temperature resistant performance.
Three, acid resistant and alkali gloves
It is to prevent acid and alkali injury hand protection products, its quality should be in accordance with the "acid (alkali) gloves" regulations. Gloves are not allowed to have defects such as spray frosting, hair embrittlement, stickiness and breakage. The non leakage of gloves means that there must be air tightness and no leakage occurs under specific pressure. According to the material, the gloves can be divided into rubber resistant acid alkali gloves, latex acid alkali gloves, plastic acid alkali gloves and acid alkali gloves. Waterproof gloves and antitoxic gloves can be replaced by acid and alkali gloves.
Four, oil resistant gloves
Using this kind of product is made of nitrile rubber, neoprene or polyurethane material, used to protect the hand skin to avoid fat substances stimulation causes various skin diseases, such as acute dermatitis, acne, folliculitis, dry skin, chapped, pigmentation and nail changes etc..
Six, anti vibration gloves
For the contact vibration, as in forestry, mining, construction, transportation and other departments using hand-held vibrating tools (such as saws, drill etc.) to prevent vibration of occupation disease "refers to the personal protective equipment disease caused by vibration. On the structure of anti vibration gloves, the vibration is absorbed mainly by adding a certain thickness of foam plastic, latex and air interlayer on the palm surface. The thicker the thickness of the liner, the more air it contains, the better the damping effect. But the hands and fingers are too thick to affect the operation.
Seven. Fire-resistant and flame retardant gloves
The traditional fire-resistant and flame retardant gloves are made of asbestos materials, which are divided into two fingers and five fingers, with large, medium and small sizes. Asbestos fibers are irritating to human skin and are rarely used at present. Now commonly used flame retardant canvas or other refractory flame retardant fabric making fireproof gloves, suitable for smelting furnacemen furnace or other kind of work.
Related Industry Knowledge
- Gloves cleaning tips
- Anti-chemical gloves material
- How to buy riding gloves
- Antistatic coating for gloves
- Cold day glove warm detail
- Material on the impact of gloves ho...
- Selection Of Outdoor Sports Gloves
- Protective gloves structural features
- Magic gloves features
- Gloves classification and style
- Introduction to the development of ...
- The difference between labor insura...
- Precautions for protective gloves
- The characteristics of acrylic fibe...
- The characteristics of Polyester fa...