Double Layers Microwave Oven Gloves
Gloves in the use of precautions The appropriate choice of gloves or not, the use of the right or not, are directly related to the health of the hand, so small to remind the selection and use of the process should pay attention to the following points: 1. The choice of gloves to have adequate...
|Kevlar, Environmental silicone and Inner cotton|
|Can be resistant to 500|
|Increase the temperature resistance|
|Can be used on both sides|
|Double-knit excellent thermal insulation fast cooling function|
|Tiger mouth design allows the thumb activity more convenient to take the mold|
|Double-sided environmentally friendly silicone|
|mainly used Industrial heat treatment,Household microwave heat,Steel, glass, mold stripping and so on.|
Gloves in the use of precautions
The appropriate choice of gloves or not, the use of the right or not, are directly related to the health of the hand, so small to remind the selection and use of the process should pay attention to the following points:
1. The choice of gloves to have adequate protection;
2 before use, especially disposable gloves, to check whether there is a small hole in the glove or damaged, abraded areas, especially finger joints;
3. Do not use the contaminated gloves to be arbitrarily dropped;
4. Remove the gloves must pay attention to the correct method to prevent the gloves of contaminated material contact with the skin and clothing, resulting in secondary pollution;
5. Do not share gloves, gloves are likely to cause cross-infection;
6. Before wearing gloves, you should wash your hands promptly, remove the gloves and wash it thoroughly, then wipe the hand cream to replenish the natural protective grease.
the choice of gloves can be considered factors
Degree of exposure
If the contact with chemicals longer, it will significantly reduce its chemical resistance. Increasing the concentration of chemicals, or dipping the glove directly into the chemicals, will cause the glove to penetrate for a time shorter than the manufacturer provides.
In general, the temperature increases, penetration speed, penetration time is shortened. The standard penetration time data is obtained at room temperature (20-25 ° C). Gloves that are used above this temperature will have significantly reduced chemical resistance.
3. Glove thickness
If necessary, choose a thicker glove or wear 2 gloves at the same time because thicker material provides better chemical resistance and significantly increases penetration time. Most importantly, the thickness of the glove material doubles and the penetration time can be extended by 4 times. When considering the thickness of gloves, but also consider the work itself needs the flexibility and touch. Thicker gloves have a stronger chemical resistance, but at the expense of their grip, hand touch and safety at the cost. There is a good balance between feel, flexibility and moderate chemical resistance. Disposable gloves, in particular, have excellent feel but are generally only used to protect milder chemical substances, have poor protective properties against many chemicals, or have no protective properties at all.
4. Surface treatment and lining
Glove surface treatment and lining are not the same, there are smooth surface, rough surface, embossed surface and so on, the lining, with cotton, fabric, etc., as well as linerless gloves. A textured, rough surface with better slip resistance for safe handling of wet, smooth objects. Cotton lining, cotton lining with good sweat-absorbing properties, fabric lining gloves also have good high temperature performance, and unlined gloves with good flexibility and touch.
5. Chemical mixture
Permeation experiments are performed with pure substances. Chemical mixtures can significantly change the penetration rate and physical properties of a given glove material. In general, for chemical compounds, a material that has good impermeability to each of the ingredients should be chosen. However, it is also possible that the mixture will have a longer penetration time than the single ingredient. Users can use the conditions of the gloves to protect the ability of the mixture to make some comments, especially the toxicity of the mixture.
6. Physical properties
The physical properties of gloves and in the use of the anti-piercing, tear resistance, wear resistance and tensile strength. Chemicals penetrate through pierced holes or torn gaps, exposing them to more chemicals than chemicals through the molecular layer, exposing them to more harmful chemicals. Sometimes need to wear two different kinds of gloves, one for mechanical damage, one for chemical damage prevention.
when the color number to provide guests, we have to dye.